TDC/TDF Corner Insertions
Empire Machinery offers new corner insertion machines by Formtek and Iowa Precision Industries (IPI) as well as pre-owned corner insertion machines.
-
Formtek Corner Insertion Corner Cadet (TDF/TDC)
Although portable and light weight, the Corner Cadet is heavy on performance.
Although portable and light weight, the Corner Cadet is heavy on performance.
-
IPI Cornermatic+Plus TDC/TDF Corner Inserter
The CORNERMATIC+PLUS® was specifically designed to address the difficulty with inserting corners into fitting ductwork. It joins other world-wide successful Cornermatics such as the Dual-Head and the Corner Cadet® in reducing shop labor. It lets you do a duct section (eight corners) in about 20 seconds in any gauge, 18GA through 26GA.
18GA to 26GA Mild SteelThe CORNERMATIC+PLUS® was specifically designed to address the difficulty with inserting corners into fitting ductwork. It joins other world-wide successful Cornermatics such as the Dual-Head and the Corner Cadet® in reducing shop labor. It lets you do a duct section (eight corners) in about 20 seconds in any gauge, 18GA through 26GA.
-
IPI Cornermatic PLUS® VERSA
IPI Cornermatic PLUS® adjustable Versa is designed to fabricate large and small duct fittings in one machine – including tough inside or outside angle off-set transition fittings.
16GA to 26GA Mild SteelIPI Cornermatic PLUS® adjustable Versa is designed to fabricate large and small duct fittings in one machine – including tough inside or outside angle off-set transition fittings.
-
IPI Single Head Cornermatic
IPI Single Head Cornermatic automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Corners are inserted square and fully crimped. No need to change the crimping adjustment when inserting corners in 18 to 26 gauge ducts.
18GA to 26GA Mild SteelIPI Single Head Cornermatic automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Corners are inserted square and fully crimped. No need to change the crimping adjustment when inserting corners in 18 to 26 gauge ducts.
-
IPI Cornermatic PLUS® InGround
IPI Cornermatic PLUS® InGround accommodates production of the largest ducts and fittings.
16GA to 26GA Mild SteelIPI Cornermatic PLUS® InGround accommodates production of the largest ducts and fittings.
-
IPI Cornermatic II Corner Inserter
IPI Cornermatic II Corner Inserter is fully automated – handles 16-26GA 5FT duct sections.
Model CM-II-FAH-1660
Handles 16-26GA 5FT Duct SectionsIPI Cornermatic II Corner Inserter is fully automated – handles 16-26GA 5FT duct sections.
Model CM-II-FAH-1660
-
IPI Whisperloc Pro 16
IPI Whisperloc PRO-XVI is equipped with push button motor controls for quick-change duct lengths and is chain driven!
Model: FAH-1672-VP
16GA Seamer (Chain Drive)IPI Whisperloc PRO-XVI is equipped with push button motor controls for quick-change duct lengths and is chain driven!
Model: FAH-1672-VP
-
IPI Dual Head Cornermatic® Classic
IPI Dual Head Cornermatic® Classic automatically inserts and crimps specially designed TDC/TDF style corners. It allows you do a duct section, eight corners, in about 60 seconds with virtually no physical exertion.
Model CM3-C-DH: For TDC style flange only
Model CM3-F-DH: For other style flange onlySelect the model to Request a Quote!
18GA to 26GA Mild SteelIPI Dual Head Cornermatic® Classic automatically inserts and crimps specially designed TDC/TDF style corners. It allows you do a duct section, eight corners, in about 60 seconds with virtually no physical exertion.
Model CM3-C-DH: For TDC style flange only
Model CM3-F-DH: For other style flange onlySelect the model to Request a Quote!
-
IPI Cornermatic II – Whisper-Loc Combo
The CORNERMATIC II® ~ WHISPER-LOC® COMBO is a unique, innovative machine that not only inserts and crimps corners into both ends of ductwork but closes longitudinal Pittsburgh seams on the same ductwork when required.
Model CM-II-FAH-1660
16GA to 26GA Mild SteelThe CORNERMATIC II® ~ WHISPER-LOC® COMBO is a unique, innovative machine that not only inserts and crimps corners into both ends of ductwork but closes longitudinal Pittsburgh seams on the same ductwork when required.
Model CM-II-FAH-1660
-
Used Lockformer Corner Cadet (HVAC)
Used Lockformer Corner Cadet
- Automated Ductwork Corner Insertion and Fastening System
- 18-26GA Capacity
- Portable for job site use
- Magazine holds approx. 175 corners
- Requires 110 Volt Electrics and 90 PSI Air Pressure
- Weight: 240 lbs
- Good Condition
Stock# 8127
30-Day Used Equipment Warranty
Used Lockformer Corner Cadet
- Automated Ductwork Corner Insertion and Fastening System
- 18-26GA Capacity
- Portable for job site use
- Magazine holds approx. 175 corners
- Requires 110 Volt Electrics and 90 PSI Air Pressure
- Weight: 240 lbs
- Good Condition
Stock# 8127
30-Day Used Equipment Warranty
| 390 Eagle Drive - R3C 2E6 - Winnipeg, MB Canada