New
Scotchman Non-Ferrous Cold Saw – Angle Master
- SKUFAB SNFCSAM
- Cold Saws, Non-Ferrous Cold Saws
- Metal Fabrication
- One 24" diameter, 132-tooth Carbide Blade (SUP-600 NF)
- SUP 600 NF
- The Angle Master System Push Feeds your Stock to the Miter Saw which is Automatically Rotated to the Angle Designated for your Part
- Feed Available – 10′ to 30′
- Touch Screen Controls
- Software (Includes Profile Screen)
- Job Storage
- Precision Miter Upcut non-ferrous Saw
- Safety Hood with Safety Switch that will not allow Saw to run with Hood Open
- Blade Door with Safety Interlock Switch
- Dual Palm Buttons
- Adjustable Feed Rate on Saw Head
- Two Horizontal Pneumatic Clamps
- Two Vertical Pneumatic Clamps
- Miter Capability
- Capable of Slotting
- Coolant Tank with Mist Lubrication
- One 24″ (600 mm) diameter, 132-tooth Carbide Blade (SUP-600 NF)
- One Blade Wrench
- Air Hose
- Base designed as a Chip Collection with Two Chip Extraction Ports
- Adjustable Leveling Pads
- 230 or 460 volt/3-ph electrics, (must specify voltage)
Saw made in Spain/AngleMaster made in Ames, IA
| SUP 600 NF Round Square Rectangle | 90 Degree 8″ (203 mm) 7″ (178 mm) 9 x 5″ (228 x 127 mm) | 45 Degree 7″ (177 mm) 6″ (152 mm) 7″ x 4-3/4″ (178 x 120 mm) |
| Non-Ferrous Upcut Saw designed for Aluminum, PVC, Copper, etc. | ||
| Cutting Speed | 3,000 RPM | |
| Motor Rate | 5.5 HP | |
| Factory Wired | Specify for both: 230 3-ph 460 3-ph | |
| Maximum Diameter Blade | 24″ (600 mm) (SUP 600) | |
| Arbor Bore | 1.97″ (50 mm) | |
| Width: | 51-1/4″ (SUP-600) | |
| Depth: | 48″ (SUP-600) | |
| Height: | (Top of Hood) 64-3/8″ (SUP 600) | |
| Height: | (From Floor to Vise) 38-5/8″ (970 mm) | |
| Shipping Weight: | 1,102 lbs. (500 kg) [SUP 600] |
- Two-year Warranty on Parts (SUP Saw)
- One-year Warranty on Parts (AngleMaster)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.