New
Scotchman Manual Cold Saw – CPO 350
- Cold Saws
- Metal Fabrication
- One 12-1/2" Diameter HSS Blade
- CPO 350
- Manual Double Self-Centering Vise Assures Burr-Free Cuts
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Operator Controlled Trigger Switch
- Capable of Slotting
- Two Cutting Speeds
- Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 12-1/2″ Diameter (315 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
Made in the USA
| Cutting Speeds | Must Specify when Ordering | |
|---|---|---|
| LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe | LT (Low Turn) 22 rpm / 44 rpm | Motor rate: 3 HP |
| HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material | HT (High Turn) 44 rpm / 88 rpm | Motor rate: 2.5 HP |
| VS (Variable Speed) ~ wired 230/460, 3-ph | VS (Variable Speed) 11 / 177 rpm | Motor Rate: 5 HP |
| VS (Variable Speed) ~ wired 220, 1PH | VS (Variable Speed) ~ 11 / 177 rpm | Motor Rate: 5 HP |
| SS (Single Speed) designed for 220V 1PH applications | SS (Single Speed) 44 rpm | Motor Rate: 3 HP |
| TUBING Round Square Rectangle SOLID Round Square | 90 Degree 4-1/2″ (114 mm) 4-1/4″ x 4-1/4″ (108 x 108 mm) 5-1/2″ x 4″ (140 x 102 mm)90 Degree 2″ (51 mm) 2″ x 2″ (51 x 51 mm) | 45 Degree 4″ (102 mm) 4″ x 4″ (102 x 102 mm) 4″ x 4″ (102 x 102 mm) 45 Degree 1-3/4″ (44 mm) 1-3/4″ x 1-3/4″ (44 x 44 mm) |
| Factory Wired | Specify 208V 3PH 230V 3PH 460V 3PH 575V 3PH 60Hz 220V 1PH 60 Hz (SS Model only) | |
| Maximum Diameter Blade | 14″ | 350 mm |
| Arbor Bore | 1-9/16″ | 40 mm |
| Pin Spacing | 4/12/64 | |
| Width | 21-7/8″ | |
| Depth | 43-1/2″ | |
| Height not including handle | 56-1/4″ | |
| Height from floor to vise | 37-7/16″ | |
| Shipping Weight | 660 lbs. | (299 kg) |
- Blades & Sharpening
- Variable Speed Control
- Square Tube Jaws
- Special Clamping Fixture
- Miter Locking Device
- Laser Saw Guide
- 60″ or 120″ Material Stop Roller Conveyor Mounted with an Advanced Measuring Quick-Loc System
- 10′ & 20′ Material Supply Track
- Programmable Stop ~ SG
3 Years Parts Warranty