Scotchman Manual Cold Saw – CPO 275
- SKUFAB SMCSC2
- Cold Saws, Manual & Semi-Automatic Cold Saws
- Metal Fabrication
- One 10" Diameter HSS Blade
- CPO 275
Looking to cut your time in the shop in half? Scotchman CPO 275 circular cold saw features a double self-centering vise to ensure safe, accurate, fast and efficient cuts. The CPO 275’s 10 3/4″ high-speed blade can Miter 90 degrees or 45 degrees to the left or right with a few quick and simple adjustments, and the built-in Miter Locking Device provides a quick, accurate measurement for every cut.
Like all Scotchman cold saws, the CPO 275 provides a burr-free, spark-free cut and is accurate within .002/inch.
Featuring two cutting speeds (LT 30/60 rpm or HT 60/120 rpm), the CPO 275 also comes with a seven-gallon coolant tank and one gallon of concentrated coolant. If you are looking for a cold saw for sale, the CPO 275 can meet all of your shop’s needs. Pair it with an SG Measuring System to automate the measuring process; simply enter the desired length on the key pad and the stop with automatically move to the correct length.
Scotchman Air Operated Cold Saw – CPO 275 Standard Features:
- Manual Double Self-Centering Vise Assures Burr-Free Cuts
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Operator Controlled Trigger Switch
- Capable of Slotting
- Two Cutting Speeds
- Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 10″ Diameter (250 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
Made in the USA
| Cutting Speeds | Must Specify when Ordering | |
|---|---|---|
| LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe | LT (Low Turn) 30 rpm / 60 rpm | Motor rate: 2.0 hp |
| HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material | HT (High Turn) 60 rpm / 120 rpm | Motor rate: 1.5 hp |
| SS(Single Speed) designed for 220v 1 ph applications | SS (Single Speed) 60 rpm | Motor rate: 2 hp |
| TUBING Round Square Rectangle | 90 Deg 3-3/8″ (86 mm) 3″ x 3″ (76 x 76 mm) 3″ x 2-3/8″ (76 x 60 mm) | 45 Deg (51 mm) 2″ (51 x 51 mm) 2″ x 2″ (51 x 51 mm) 3″ x 2″ (76 x 51 mm) |
| SOLID Round Square | 90 Deg 1-1/2″ (38 mm) 1-1/2″ x 1-1/2″ (38 x 38 mm) | 45 Deg 1″ (25 mm) 1″ x 1″ (25 x 25 mm) |
| Factory Wired | Specify 208V 3PH 230V 3PH 460V 3PH 575V, 3 PH 60Hz 220V 1PH (SS Model Only) | |
| Maximum Diameter Blade | 10-3/4″ | 275 mm |
| Arbor Bore | 1-1/4″ | 32 mm |
| Pin Spacing | 2/8/45 | |
| Width | 21-7/8″ | |
| Depth | 43-1/2″ | |
| Height not including handle | 53-1/4″ | |
| Height from floor to vise | 36-1/8″ | |
| Shipping Weight | 550 lbs. | (279 kg) |
- Blades & Sharpening
- Square Tube Jaws
- Special Clamping Fixture
- Miter Locking Device
- Laser Saw Guide
- 60″ or 120″ Material Stop Roller Conveyor Mounted with an Advanced Measuring Quick-Loc System
- 10′ & 20′ Material Supply Track
- Programmable Stop ~ SG
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.