New
Scotchman Air-Operated Cold Saw – CPO 275 PK
- SKUFAB SAOCSC2PK
- Cold Saws, Manual & Semi-Automatic Cold Saws
- Metal Fabrication
- CPO 275PK
- One 10" Diameter HSS Blade
- Power Double Self-Centering Vise Assures Burr-Free Cuts
- Air-operated clamp for material vise
- Operator Controlled Trigger Switch
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Device: quick, accurate setting-stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- Two Cutting Speeds
- Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 10″ Diameter (250 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
Made in the USA
| Cutting Speeds | Must Specify when Ordering | |
|---|---|---|
| LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe | LT (Low Turn) 30 rpm / 60 rpm | Motor rate: 2HP |
| HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material | HT (High Turn) 60 rpm / 120 rpm | Motor rate: 1.5HP |
| SS(Single Speed) designed for 220v 1ph applications | SS (Single Speed) 60 rpm | Motor rate: 2HP |
| TUBING Round Square Rectangle SOLID Round Square | 90 Deg 3-3/8″ (86 mm) 3″ x 3″ (76 x 76 mm) 3″ x 2-3/8″ (76 x 60 mm) 90 Deg 1-1/2″ (38 mm) 1-1/2″ x 1-1/2″ (38 x 38 mm) | 45 Deg 2″ (51 mm) 2″ x 2″ (51 x 51 mm) 3″ x 2″ (76 x 51 mm) 45 Deg 1″ (25 mm) 1″ x 1″ (25 x 25 mm) |
| Factory Wired | Specify 208V 3PH 230V 3PH 460V 3PH 575V 3PH 60Hz 220V 1PH (SS Model Only) | |
| Maximum Diameter Blade | 10-3/4″ | 275 mm |
| Arbor Bore | 1-1/4″ | 32 mm |
| Pin Spacing | 2/8/45 | |
| Width | 21-7/8″ | |
| Depth | 43-1/2″ | |
| Height not including handle | 53-1/4″ | |
| Height from floor to vise | 36-1/8″ | |
| Shipping Weight | 580 lbs. | (263 kg) |
- Blades & Sharpening
- Square Tube Jaws
- Special Clamping Fixture
- Laser Saw Guide
- 60″ or 120″ Material Stop Roller Conveyor Mounted with an Advanced Measuring Quick-Loc System
- 10′ & 20′ Material Supply Track
- Programmable Stop ~ SG
3 Years Parts Warranty
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.