New
Scotchman Non-Ferrous Cold Saw – CPO 350 NFPKPD
- SKUFAB SNFCSC3NFPKPD
- Cold Saws
- Metal Fabrication
- One 13-1/2" Diameter Carbide-Tipped Blade
- CPO 350 NFPKPD
- Semi-Automatic Cycle
- Air-operated Clamp for Material Vise
- Pneumatic Power Down Feed with Electric Controls
- Separate Feed Control of both Feed Rate and Feed Pressure
- Power Double Self-Centering Vise Assures Burr-Free Cuts
- Emergency Stop Button
- Miter Capabilities 45 Degrees Left and 45 Degrees Right
- Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- 5 HP, 3,000 RPM
- Positive Cog Belt Driven
- Chip Drawer
- One Gallon Coolant Tank with Mist Lubrication System
- One 13-1/2″ Diameter (338 mm) Carbide-Tipped Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
Made in the USA
| Non-Ferrous machines designed for aluminum, plastic, copper, etc. | ||
|---|---|---|
| Cutting Speed | 3,000 rpm | |
| Motor Rate | 5.0 HP | |
| TUBING Round Square Rectangle SOLID | 90 Degree 4-1/2″ (114 mm) 4-1/4″ x 4-1/4″ (108 x 108 mm) 5-1/2″ x 4″ (140 x 102 mm) 90 Degree | 45 Degree 4-1/4″ (108 mm) 4″ x 4″ (102 x 102 mm) 4″ x 4″ (102 x 102 mm) 45 Degree |
| Factory Wired | Specify 208V 3PH 230V 3PH 460V 3PH 575V 3 PH 60Hz | |
| Maximum Diameter Blade | 14″ | 350 mm |
| Arbor Bore | 1-9/16″ | 40 mm |
| Pin Spacing | 4/12/64 | |
| Width | 21-7/8″ | |
| Depth | 43-1/2″ | |
| Height not including handle | 56-1/4″ | |
| Height from floor to vise | 37-7/16″ | |
| Shipping Weight | 725 lbs. | (328 kg) |
- Carbide Blade
- Miter Locking Device
- Laser Saw Guide
- 60″ or 120″ Material Stop Roller Conveyor Mounted with an Advanced Measuring Quick-Loc System
- 10′ & 20′ Material Supply Track
- Programmable Stop ~ SG
3 Years Parts Warranty