New
Scotchman Non-Ferrous Cold Saw – CPO 350 NFPK
- SKUFAB SNFCSC3NFPK
- Cold Saws, Non-Ferrous Cold Saws
- Metal Fabrication
- One 13-1/2" Diameter Carbide-Tipped Blade
- CPO 350 NFPK
- Power Double Self-Centering Vise Assures Burr-Free Cuts
- Air-operated Clamp for Material Vise
- Operator Controlled Trigger Switch
- Miter Capabilities 45 Degrees Left and 45 Degrees Right
- Miter Locking Device: Quick, Accurate Settings-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- 5 HP, 3,000 rpm
- Positive Cog Belt Driven
- Chip Drawer
- One Gallon Coolant Tank with Mist Lubrication System
- One 13-1/2″ Diameter (338 mm) Carbide-Tipped Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
Made in the USA
Non-Ferrous machines designed for aluminum, plastic, copper, etc. | ||
---|---|---|
Cutting Speed | 3,000 rpm | |
Motor Rate | 5.0 HP | |
TUBING Round Square Rectangle SOLID | 90 Degree 4-1/2″ (114 mm) 4-1/4″ x 4-1/4″ (108 x 108 mm) 5-1/2″ x 4″ (140 x 102 mm) 90 Degree | 45 Degree 4-1/4″ (108 mm) 4″ x 4″ (102 x 102 mm) 4″ x 4″ (102 x 102 mm) 45 Degree |
Factory Wired | Specify 208V 3 PH 230V 3 PH 460V 3 PH 575V 3 PH 60 Hz | |
Maximum Diameter Blade | 14″ | 350 mm |
Arbor Bore | 1-9/16″ | 40 mm |
Pin Spacing | 4/12/64 | |
Width | 21-7/8″ | |
Depth | 43-1/2″ | |
Height not including handle | 56-1/4″ | |
Height from floor to vise | 37-7/16″ | |
Shipping Weight | 650 lbs. | (294 kg) |
- Carbide Blade
- Miter Locking Device
- Laser Saw Guide
- 60″ or 120″ Material Stop Roller Conveyor Mounted with an Advanced Measuring Quick-Loc System
- 10′ & 20′ Material Supply Track
- Programmable Stop ~ SG
3 Years Parts Warranty
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.