The UKV Series is ideal for single-piece production as well as prototype work. The versatility offered by the quick change tooling segments, available back gauge options, and taller tooling segments make these brakes indispensable in any shop.
Standard features
| Model | UKV 100 | UKV 150 | UKV 200 | |
|---|---|---|---|---|
| Working Length | inch | 39.37 | 59 | 78.74 |
| Bending Capacity | Mild Steel | 14 Ga | 16 Ga | 20 Ga |
| Aluminum | 0.118 | 0.088 | 0.059 | |
| Stainless | 18 Ga | 20 Ga | 24 Ga | |
| Copper | 0.098 | 0.078 | 0.039 | |
| Zinc | 0.098 | 0.098 | 0.078 | |
| Length | inch | 63 | 83 | 103 |
| Depth - Machine only | inch | 31.5 | 31.5 | 31.5 |
| Height | inch | 47.24 | 47.24 | 47.24 |
| Weight | lbs | 881 | 1239 | 1378 |
| Partition of segments | ||||
| Per 1 Corner - LH & RH | inch | 3.93 | 3.93 | 3.93 |
| Per 1x30/40/60/70 mm | inch | 6 x 3.93 | 11 x 3.93 | 16 x 3.93 |
| Clamping beam segment height | inch | 3.93 | 3.93 | 3.93 |
| Clamping Beam Opening Height | inch | 3.78 | 3.78 | 3.78 |
Available options
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.