Lockformer
Empire Machinery offers a wide variety of Lockformer Equipment across Canada including Flangers, TDC and Duct Notchers and Rollformers.
-
Lockformer Button Punch Snaplock Flanger
Roll single-direction curves down to a minimum radius of 3-1/2” inside or a 5” outside radius, almost automatically with Lockformer Button Punch Snaplock Flanger.
Roll single-direction curves down to a minimum radius of 3-1/2” inside or a 5” outside radius, almost automatically with Lockformer Button Punch Snaplock Flanger.
-
Lockformer Auto-Guided Flanger
Lockformer Auto-Guided Flanger automatically follow any edge – curved or straight, with the Lockformer Model 16 Flanger.
Lockformer Auto-Guided Flanger automatically follow any edge – curved or straight, with the Lockformer Model 16 Flanger.
-
Used Lockformer 20GA Buttonlock Power Flanger
Used Lockformer 20GA Buttonlock Power Flanger
- Model: 20 GA PF
- Serial #: 1518 • Capacity: 20 – 28GA Mild Steel
- Flange Height: 7/16″ Approx.
- Forming Speed: 18 FPM
- Table Size: 24″ Square
- Working Height: 34″
- Motor: 3/4 HP – 1800 RPM
- Electrics: 115/230V 1PH
- Weight: 250 lbs
- Good Condition
Stock# 8060
30-Day Used Equipment Warranty
Used Lockformer 20GA Buttonlock Power Flanger
- Model: 20 GA PF
- Serial #: 1518 • Capacity: 20 – 28GA Mild Steel
- Flange Height: 7/16″ Approx.
- Forming Speed: 18 FPM
- Table Size: 24″ Square
- Working Height: 34″
- Motor: 3/4 HP – 1800 RPM
- Electrics: 115/230V 1PH
- Weight: 250 lbs
- Good Condition
Stock# 8060
30-Day Used Equipment Warranty
-
Lockformer TDC Notcher
Lockformer TDC 10FT 16GA Notcher comes standard with 5 notching heads and used for fast and accurate gang notching of duct blanks.
Lockformer TDC 10FT 16GA Notcher comes standard with 5 notching heads and used for fast and accurate gang notching of duct blanks.
-
Lockformer Speednotch TDC Notcher
Lockformer Speednotch 10FT 16GA TDC Notcher allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing.
Model: 16
Lockformer Speednotch 10FT 16GA TDC Notcher allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing.
Model: 16
Model: 16 -
Used Lockformer 10FT 16GA Hydraulic Slip & Drive Notcher
Used Lockformer 10FT 16GA Hydraulic Slip & Drive Notcher
- Capacity: 10FT 16GA
- Residential notcher with 5 heads
- 5 Heads (2 Corners, 3 “V”)
- Electrics: 208V 3PH 60Hz
- Good Condition
Stock# 6943
30-Day Used Equipment Warranty
Used Lockformer 10FT 16GA Hydraulic Slip & Drive Notcher
- Capacity: 10FT 16GA
- Residential notcher with 5 heads
- 5 Heads (2 Corners, 3 “V”)
- Electrics: 208V 3PH 60Hz
- Good Condition
Stock# 6943
30-Day Used Equipment Warranty
-
Lockformer Pittsburgh Rollformers
Lockformer Pittsburgh Rollformers with 14GA, 16GA and 18GA mild steel capacity have 7 forming stations with two forming positions.
Models: 14, 16 & 18
Lockformer Pittsburgh Rollformers with 14GA, 16GA and 18GA mild steel capacity have 7 forming stations with two forming positions.
Models: 14, 16 & 18
Models: 14, 16 & 18 -
Lockformer TDC Rollformer
Lockformer TDC Rollformer model TDC-V16 has 12 forming stations and produces TDC flanges from 18 to 26 ga. at speeds of up to 50 feet per minute!
Model: TDC-V16
Lockformer TDC Rollformer model TDC-V16 has 12 forming stations and produces TDC flanges from 18 to 26 ga. at speeds of up to 50 feet per minute!
Model: TDC-V16
Model: TDC-V16 -
Lockformer Standing “S” Cleat Rollformer
Lockformer Standing “S” Cleat Rollformer, in just one pass, form a shape that combines a conventional “S” cleat with a standing seam for greater strength and rigidity.
Lockformer Standing “S” Cleat Rollformer, in just one pass, form a shape that combines a conventional “S” cleat with a standing seam for greater strength and rigidity.
-
Lockformer Triplex Cleatformer
With 9 forming stations, the Lockformer Triplex Cleatformer can form 20-28 gauge sheet metal into ‘S’ and drive cleats on the inboard forming positions and up to 12 auxiliary roll set profiles on the outboard forming positions at speeds averaging 100 fpm.
With 9 forming stations, the Lockformer Triplex Cleatformer can form 20-28 gauge sheet metal into ‘S’ and drive cleats on the inboard forming positions and up to 12 auxiliary roll set profiles on the outboard forming positions at speeds averaging 100 fpm.
-
Used Lockformer S-Cleat Rollformer
Used Lockformer Rollformer – Model 8900 Cleatformer
- Model: 8900
- Serial #: 8368
- Capacity: 22 – 28GA for “S” Cleat
- Width of “S” Cleat: 1 1/16″
- Forming Speed: 100 FPM – Approx.
- Includes:
– Auxiliary 20GA Pittsburgh Rolls
– Drive Cleat Rolls - Motor: 5 HP
- Electrics: 575V 3PH 60Hz
- Dimensions: 60″ x 24″ x 40″
- Weight: 900 lbs. approx.
- Good Working Condition
Stock# 7787C
30-Day Used Equipment Warranty
Used Lockformer Rollformer – Model 8900 Cleatformer
- Model: 8900
- Serial #: 8368
- Capacity: 22 – 28GA for “S” Cleat
- Width of “S” Cleat: 1 1/16″
- Forming Speed: 100 FPM – Approx.
- Includes:
– Auxiliary 20GA Pittsburgh Rolls
– Drive Cleat Rolls - Motor: 5 HP
- Electrics: 575V 3PH 60Hz
- Dimensions: 60″ x 24″ x 40″
- Weight: 900 lbs. approx.
- Good Working Condition
Stock# 7787C
30-Day Used Equipment Warranty
-
Used Lockformer 16GA Pittsburgh Rollformer
Used Lockformer 16GA Pittsburgh Rollformer
- Serial #: 13466
- Capacity: 16-20GA
- Pocket size: 1/2″
- Speed 40-45 fpm
- Electrics: 575V 3PH 60Hz; 3HP
- Good Condition
Stock# 7996C
30-Day Used Equipment Warranty
Used Lockformer 16GA Pittsburgh Rollformer
- Serial #: 13466
- Capacity: 16-20GA
- Pocket size: 1/2″
- Speed 40-45 fpm
- Electrics: 575V 3PH 60Hz; 3HP
- Good Condition
Stock# 7996C
30-Day Used Equipment Warranty