SSQ3 MultiPro
The SSQ3 MultiPro is a portable rollforming machine that takes flat metal coil stock and forms it into finished roof and wall panels on-site or in-shop. It’s built for contractors who make standing seam roofing, wall panels, soffit/underdeck, board & batten siding, and other architectural metal panels right where the work is happening — no need to order panels from a factory.
Standard Features
- 16 Polyurethane Drive Rollers
- Roller System with Shear Dies
- Hydraulic Drive & Shear
- Powder-Coated Aluminum Covers
- Welded Tubular Steel Frame
- Push Button RUN/JOG Controls at Entry & Exit Ends
- Power Interruption Safety Circuit
- UL Rated Panels (Must Be Certified by UL for Recognition)
- Industry’s Best Warranty
- Choice of: Quick-ChangeTM Power-Pack (Gas or Electric)
- Choice of: One Pair of Bead, Pencil, Striation or V-Rib Rollers
SSQ3 Panel Machines:
- Length: 14’4” (4.4m) without Angled Slitter, 15’4” (4.7m) with Angled Slitter
- Width: 5′ 2″ (1.57m)
- Height with Over Head Rack: 4’ 3” (1.3m)
- Height without Over Head Rack: 2’ 6″ (0.8m)
- Weight (Base Machine with Roller Set, Power Pack, and Rib Rollers) 2,830 lbs. (1,280 kg)
Shear:
- Hydraulically Powered, Infinitely Adjustable, Hardened Tool Steel Blades & Shear Dies
- Panel Recognition Safety System
Drive:
- 16 Polyurethane Drive Rollers, Hydraulically Driven via Chain, Sprocket & Gear
Speed:
- Gas Engine: 75 ft./min (23m/min) Approx. max.
- 3PH 60Hz Motor: 72 ft./min. (22m/min.) approx.
- 1PH 60Hz Motor: 50 ft./min. (15m/min.) approx.
- 3PH 50Hz Motor: 58 ft./min. (18m/min.) approx.
- 1PH 50Hz Motor: 40 ft./min. (12m/min.) approx.
Coil Widths:
- 15” to 30” (381mm to 762mm)
Maximum Coil Diameter:
- 32” (812mm) with the Overhead Reel Rack 45” (1,143mm) with the Free Standing Decoiler
Finished Panel Widths:
- 12” to 24” (305mm to 610mm) – Note: Variable Depending on Panel Profile
Power Options:
- 7.5 HP, 220V, 60 Hz, 3PH, 18 amps
- 5 HP, 220V, 60 Hz, 1PH, 20 amps
- Gas Power (16 HP Briggs & Stratton Engine)
- 5 HP, 380V, 50 Hz, 3PH, 8 amps (overseas use)
- 7.5 HP, 460V, 60 Hz, 3PH, 9 amps
- 5 HP, 220V, 50 Hz, 1PH, 21 amp
Materials Formed:
- Painted Steel: 28 ga. to 22 ga. (0.4mm to 0.8mm) (painted, Galvalume, coated galvanized)
- 50 ksi maximum for 24 to 22 ga.
- Painted Aluminum: .027” to .040” (0.7mm to 1.0mm)
- Copper: 16 oz. to 20 oz. 3/4 Hard (0.5mm to 0.7mm)
- Note: Notching not recommended with copper.
- Terne Coat Stainless: 26 ga. (0.5mm) Note: Notching not recommended with terne coat.
 SS100 – 1″ Mechanical Seam
| SS150 – 1.5″ Mechanical Seam
|
 SSQ200 – 2″ Mechanical Seam
|  SSQ210A – 2″ ARMCO Mechanical Seam
|
 SS450 – 1.5″ Snap-Lock
|  SS450SL – 1.5″ Snap-Lock
|
 SSQ550 – 1.5″ Snap-Lock
|  SSQ675 – 1.75″ Snap-Lock
|
 FF100 – 1″ Snap-Lock With Slotted Flange
|  FF150 – 1.5″ Snap-Lock With Slotted Flange
|
 TRQ250 – 2.5″ Mechanical Seam Trapezoid
|  SSQ275 – 2″ Snap-Lock/Mechanically Seamed Proprietary Profile
|
 FWQ100 – 1″ Flush Wall/Soffit/Underdeck Panel With Adjustable Reveal
|  FWQ150 – 1.5″ Flush Wall/Soffit/Underdeck Panel With Adjustable Reveal
|
 Clip Relief
|  Bead Ribs (Standard or Wide)
|
 Pencil Ribs (Small or Large)
|  V-Ribs (Small or Large)
|
 Striation Ribs
|  T-Panel
|
 BB750 Profile – Board and Batten
|
How It Works
Rollforming: The machine pulls flat metal coil (steel, aluminum, copper) through a series of rolls that shape it into a specific panel profile.
Shearing: After forming, a hydraulic shear cuts the panel to the desired length automatically as it exits the machine.
Profiles: Supported profiles include a wide range of standing seam, snap-lock, flush wall/soffit, and board & batten styles — up to 16 different configurations with quick-change tooling.
What It’s Used For
✔ Producing custom roof panels for residential or commercial metal roofing jobs
✔ Fabricating metal wall panels and cladding
✔ Providing on-site panel production, reducing delivery cost and wait times
✔ Allowing precise lengths, widths, and profiles customized to each job’s needs
Key Features
Portable — can be mounted on a trailer or used in a shop.
Hydraulic drive & shear — for fast, consistent forming and cutting.
Quick-change tooling — swap between different panel profiles in ~45 minutes.
Safety & diagnostics — includes RFID cover sensors, LED lighting, and shear warning indicators.
Optional automation — can be equipped with the UNIQ® Automatic Control System for job tracking and automation.
Materials & Specs
Handles painted steel, aluminum, copper, and similar metals within specific gauges.
Finished panel widths generally range from about 12″ to 24″ depending on profile.
Multiple power options (gas or electric) let you run it in varied environments.
In short: the SSQ3 is a versatile, advanced portable panel rollformer that lets you make high-quality metal roofing and wall panels on-site or in your shop, tailored to the exact specifications of your project — saving time, transport costs, and giving you more control over production.