IPI Dual Head Cornermatic® Classic automatically inserts and crimps specially designed TDC/TDF style corners. It allows you do a duct section, eight corners, in about 60 seconds with virtually no physical exertion.
Model CM3-C-DH: For TDC style flange only Model CM3-F-DH: For other style flange only
Dual Head Cornermatic® Classic & Adjustable Dual Head Cornermatic® Classic
Adjustable Dual Head Cornermatic® Classic adds the feature of automatically adjusting the upper crimping head to handle duct from 4′ to 6′ in length.
The Dual Head Cornermatic® Classic automatically inserts and crimps specially designed TDC/TDF® style corners in seconds. Lets you do a duct section, eight corners, in about 60 seconds with virtually no physical exertion. Compared to other methods of hand insertion and crimping, it’s a saving of 3 to 6 minutes per section of ductwork depending on size and gauge.
Handles duct up to 60″
Corners are inserted square and fully crimped.
No need to change the crimping adjustment when inserting corners in 18 to 26 gauge ducts,
CM3-DH with 16 gauge capacity optional.
Each quick loading magazines hold up to 175 corners.
Corners are shipped presorted and oriented for direct loading into the magazine.
No need for hand sorting.
Push the ductwork or fitting into the flange guides and the machine automatically does the rest.
IPI Dual Head Cornermatic® Classic Specifications:
Model CM3-C-DH: For TDC style flange only
Model CM3-F-DH: For other style flange only
Air 85 – 100 PSI (5.5 – 7 Bar)
CAPACITY Gauge: 18 to 26, 16 gauge optional
(.050” to .022” / 1.3mm to 0.6mm, 0.060″ / 1.52 mm optional)
Mild Steel Only
SIZE Dimensions (L x W x H)
Model CM3-DH: 24-1/8” x 24-1/8” x 116”
Model CM3-DHA: 35-3/4” x 35-3/4” x 127”
Electrical 110VAC, 60 Hz
Model CM3-DH: 1,400 lbs.
Model CM3-DHA: 1,800 lbs.