Roper Whitney Electro-Mechanical Shear
Roper Whitney mechanical shear model 10M14, capacity is 14GA mild steel, 18GA stainless up to 121.25 inches in cutting length. The electro-mechanical design of the 10M14 provides quiet operation with low power consumption.
Roper Whitney mechanical shears utilize a simple low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance. The 10M14 capacity is 14-gauge mild steel, 18-gauge stainless up to 121.25 inches in cutting length. The electro-mechanical design of the 10M14 provides quiet operation with low power consumption. The shear is initiated by a moveable footswitch. An oversized shield and toe kick plate are incorporated into the footswitch for added operator safety. The 10M14 is capable of 35 cutting strokes per minute. For increased speeds please consult factory.
The 10M14 Series shears are standard with an two edge interchangeable top and bottom, high carbon, high chrome top and bottom blades , independent, self-leveling hold down with neoprene insert, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table, with dual inch/metric inlaid bed scales and non-metallic gibs.
Non-metallic self-lubricating ram gibs ensure long life for the 10M14. Maintenance free self-lubricating bearings are standard.
Made in the USA
|Maximum shearing capacity, mild steel rated materials at 80,000 tensile/ 44,000 yield||14 GA|
|Maximum shearing capacity, stainless steel rated materials at 90,000 teniles/ 55,000 yield||18 GA|
|Maximum cutting length||124.25 in|
|Back gauge range||30 in|
|Strokes per minute||35|
|Hold down system||Solid bar with non-marring urethane insert|
|Drive motor – 230/460v, 3-phase, 60 Hz||5 HP|
|Back gauge motor – 230/460v, 3-phase, 60 Hz||1/4 HP|
|Overall dimensions, less gauges||141 x 27 x 52 in|
|Floor space, gauges in position||141 x 62 x 52 in|
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.