SSR MultiPro Jr. Roof Panel Machine
The SSR™ MultiPro Jr. Roof Panel Machine is a portable metal rollforming machine used to produce metal roof panels on-site or in a shop, primarily for residential and light-commercial roofing work. It’s a more compact, entry-level rollformer in New Tech’s line, designed to be simpler, lighter, and generally more affordable than larger machines.
Standard Features
- 8 Polyurethane Drive Rollers
- Powder-Coated Covers
- Length Control Limit Switch
- 100-Foot, 10 Gauge, 20 Amp Extension Cord
- Runs up to 24 Gauge Steel
- Waterproof NEMA 4 Electrical System
- (2) Run-Out Tables (10-Foot Sections Each)
- Forward Pulling, Easy Cut Manual Shear
- One Expandable Arbor / Reel
- Push Button RUN/JOG Controls at Entry & Exit Ends
- Welded Tubular Steel Frame
- Dual Overhead Reel Rack
- UL Rated Panels (Must Be Certified by UL for Recognition)
- Industry’s Best Warranty
- Choice of: EZE-ChangeTM Profile Roller System with Shear Dies
- Choice of: One Pair of Bead, Pencil, Striation or V-Rib Rollers
- Electric motor: 1.5 HP, 120V, 60 Hz, 1PH, 18 amp (220V option available at an additional cost).
Specifications:
SSR Panel Machines
- Length: 12’ 6” (3.9m)
- Width: 3’ 10” (1.2m)
- Height with Over Head Rack: 4’ 3” (1.3m)
- Height without Over Head Rack: 1’ 10” (.6m)
- Weight (Base Machine with Roller Set and Rib Rollers): 1,715 lbs. (780kg)
SSR On Trailer
- Length: 18’ 11” (5.8m)
- Width: 7’ 2 1/2″ (2.2m)
- Height with Reel: 6’ 3” (1.9m)
- Weight of Machine and Trailer (including Roller Set and Rib Rollers): 3,975 lbs. (1,800kg)
Materials Formed
- Painted Steel: 28 ga. to 24 ga. (0.4mm to 0.6mm) (painted, Galvalume, coated galvanized)
- 50 ksi maximum for 24 ga.
- Painted Aluminum: .027” to .040” (.7mm to 1.0mm)
- Copper: 16 oz. to 20 oz. 3/4 Hard (.5mm to .7mm
Shear
- Manually Powered, Infinitely Adjustable, Hardened Tool Steel Blades & Shear Dies
Speed
- 30 ft./min (9m/min) Approx.
Drive
- Electrically Driven Polyurethane Rollers via Chain & Sprocket
Coil Widths
- 15” to 20” (380mm to 508mm)
Finished Panel Widths
- 12” to 16” (254mm to 406mm) – Note: Variable Depending on Panel Profile
Maximum Coil Diameter
- 32” (812mm) with the Overhead Reel Rack
- 45” (1,143mm) with the Free Standing Decoiler
SSR Add-on Option Weights
- Trailer: 2,260 lbs. (1020 kg)
- Overhead Reel Rack: 316 lbs. (143 kg)
- Expandable Arbor, each: 80 lbs. (36 kg)
- 10-foot Run-out Table, each: 29 lbs. (13 kg)
- PVC Strippable Film Applicator: 60 lbs. (27 kg)
SSR™ MultiPro Jr. Roof Panel Machine Profiles:
 SS100 – 1″ Mechanical Seam
| SS100 – 1″ Mechanical Seam
|
SS150 – 1.5″ Mechanical Seam
| SS150 – 1.5″ Mechanical Seam
|
 SS450 – 1.5″ Snap-Lock
|  SS450SL – 1.5″ Snap-Lock
|
 FF100 – 1″ Snap-Lock With Slotted Flange
|  FF150 – 1.5″ Snap-Lock With Slotted Flange
|
 T-Panel
|  Clip Relief
|
 Bead Ribs (Standard or Wide)
|  Pencil Ribs (Small or Large)
|
 V-Ribs (Small or Large)
|  Striation Ribs
|
How It Works
Rollforming:
The machine feeds flat metal coil stock through a series of rollers that shape the metal into roofing panel profiles (like standing seam, snap-lock, mechanical seam).Manual Shearing:
After forming, panels are cut to length using a forward-pulling, easy-cut manual shear — meaning the operator physically actuates the shear rather than it being hydraulic.
What It’s Used For
✔ Making metal roofing panels for homes and light commercial buildings
✔ Producing up to seven different panel profiles (profile choice changes tooling on the machine)
✔ Giving contractors the ability to fabricate panels where the job is, reducing dependence on factory deliveries and transportation costs
Key Features & Specs
Profiles: Up to 7 roof panel profiles with the supplied EZE-Change™ roller system.
Drive System: Electrically driven with polyurethane rollers (no gas engine standard).
Shear: Manual shear (operator-activated), not hydraulic.
Power: Typically runs on a 1.5 HP electric motor (120 V/220 V options).
Speed: Around 30 ft/min (9 m/min) — slower than larger models but adequate for smaller jobs.
Materials: Forms painted steel (up to ~24 ga), aluminum (.027–.040″), and copper within similar gauge ranges.
Finished Panel Widths: Typically ≈12″–16″ depending on the profile used.
Size & Weight: Much smaller footprint than big rollformers — roughly 12’6″ long and ~1,715 lbs base machine.
Who It’s Best For
The SSR MultiPro Jr. is ideal if you:
Are doing residential or light commercial metal roofing
Want a portable, job-site ready machine
Are starting or growing a metal roofing business
Don’t need the higher speed or extensive profile options of larger machines like the SSH or SSQ series
In Short
The SSR™ MultiPro Jr. Roof Panel Machine is essentially a compact metal roofing rollformer that lets you take flat metal coil and turn it into finished roofing panels with a handful of profiles. It’s geared toward ease of use, portability, and entry-level production for contractors focusing on smaller scale or residential projects, rather than high-volume commercial work.