Tennsmith Manual Floor Model Heavy Duty Down Flange-TDF/TDC Finger Brakes
Tennsmith 4FT and 6FT Manual Floor Model Heavy Duty Down Flange-TDF/TDC Finger Brakes (Box and Pan) with 12GA and 16GA mild steel capacities.
Tennsmith Manual Floor Model Heavy Duty Down Flange-TDF/TDC Finger Brakes (Box and Pan) Features:
Tennsmith’s HBT Series is designed to provide forming capabilities for complex parts. This machine is truly a universal hand brake, which allows for the removal of both upper and lower segments of fingers.
Complex parts such as HVAC transverse duct forming and down flanged parts, as well as architectural sheet metal and signage applications, can easily be formed using the machine.
Made in the USA
|Manual Floor Model Heavy Duty Down Flange-TDF/TDC Finger Brakes||HBT48-12||HBT72-16|
|Capacity, mild steel||12GA||16GA|
|Capacity, with bending support angle removed, mild steel||16GA||20GA|
|Bending length||48 in (4FT)||72 in (6FT)|
|Maximum lift of beam||1-1/2 in||1-1/2 in|
|Front to rear beam adjustment||1/2 in||1/2 in|
|Maximum depth of box||4 in||4 in|
|Minimum reverse bend||5/8 in||5/8 in|
|Minimum flange in capacity material||1 in||1 in|
|Top segment tooling widths||2, 3 and 4 in.||2, 3 and 4 in.|
|Lower segment tooling widths||1, 1-1/2, 4, 6, 8, 12, 20 in.||1, 1-1/2, 4, 6, 8, 12, 20 in.|
|Bending beam tooling segments||1, 1-1/2, 6, 8, 12, 20 in.||1, 1-1/2, 4, 6, 8, 12, 20 in.|
|Maximum transverse bend (through tooling centers)||2 in||2 in|
|Maximum transverse bend (at either end of machine)||3 in||3 in|
|Dimensions, counterweights in place, LxWxH||72 x 36 x 53 in.||89 1/2 x 36 x 53 in.|
|Shipping weight||1750 lbs||2200 lbs|
Sheet Metal Break | Sheet Metal Breaks
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.