Tennsmith Manual Floor Model Box & Pan Brakes
Tennsmith 4FT and 6FT Manual Floor Model Box & Pan Brakes with 12GA and 16GA Mild Steel Capacities.
Each hand brake is ideal for both box and pan and straight bending of hot and cold rolled plate, stainless steel, aluminum and heavy plastic.
Ample clamping and nose bar adjustments allow for the bend radius necessary for your application. Welded steel plate construction and heavy truss rods and braces provide strength and rigidity.
This brake features a removable apron insert for 1/4-inch bends of lighter material. The upper leaf adjustment screws feature thrust bearings to prevent upper beam creep.
The removable fingers are case hardened for long service
Made in the USA
|Manual Floor Model Box & Pan Brakes||HBU48-12||HBU72-16|
|Capacity, mild steel||12GA||16GA|
|Capacity, stainless steel||16GA||20GA|
|Bending length||48-1/4 in (4FT)||72 in (6FT)|
|Maximum lift of beam||1-1/2 in||1-1/2 in|
|Front to rear beam adjustment||1 in||1 in|
|Maximum depth of box||4 in||4 in|
|Maximum reverse bend||1/4 in||1/4 in|
|Minimum flange in capacity material||1 in||1 in|
|Finger widths||2, 3 and 4 in.||2, 3 and 4 in.|
|Dimensions, counterweights in place, LxWxH||72 x 36 x 53 in.||96 x 36 x 53 in.|
|Shipping weight||1330 lbs||1700 lbs|
Sheet Metal Break | Sheet Metal Breaks
Only logged in customers who have purchased this product may leave a review.