Tennsmith CNC Folders
Tennsmith 10FT and 12FT CNC Folders with 14GA and 16GA Mild Steel Capacities. are fast, highly durable and ready to meet your metal forming needs.
- SKUHVAC TCF
- Benders, Brakes & Folders, CNC Folding, Manual Benders, Power Benders
- HVAC
The TENNSMITH SBS Series mechanical sheet metal folder incorporates a twin motor drive system for the folding beam. This allows the system to be fast and extremely accurate. Bending speeds up to 90 degrees per second are easily achieved. Another advantage to this system is maintenance. Unlike with a chain drive system, there are no adjustments needed to this system.
For maximum hemming capacity, another strong feature of the Tennsmith SBS Series, Metal Folding Machine, is the center drive of the clamping system. The placement of the motor in the center of the machine maximizes power while reducing torque loss through the drive shaft. The benefit is a hemming capacity of 20GA for the SBS12614 and 22GA for the SBS15016.
The back gauge for the SBS Series features a twin ball screw design. The system is fast and extremely accurate. All three drive systems of the SBS Series: Folding beam, Clamping Beam and Back gauge are controlled by frequency inverters, giving the machine great accuracy.
Another noticeable feature of the SBS Series is the large 17-inch graphical touch screen display. The larger screen allows easy viewing of the touch screen program.
SBS control features:
- Graphical Programming of Profiles
- Hemming Macros for Open, Closed, and Teardrop hems
- Radius Macro for Complex bending of different Radii (Cornice Work etc.)
- Parts Counter
- Automatic Blank Calculation
- Bend Compensation for different material spring back and bending bar set-up
- Material Handling Instructions
The brains behind the touch screen are cutting edge. Designed for harsh environments, the SBS control system will work with ease in any climate. The system features flash memory for both the PLC and PC. This means if anything should happen to your system you can be up and running the next day without the need of onsite programming of replacement parts. All machine information is stored on the Flash drives. The design utilizes the latest technology.
The key to the SBS metal folder machine design is serviceability. One of the main thoughts that went into designing the SBS Series – Metal Folding Machine was service. Every design element and feature had to easily be maintained and serviced. We feel so strongly about our design that the SBS Series carries a Three-Year Factory Warranty.
Made in the USA
Tennsmith SBS Series CNC Folders | SBS12614 | SBS15016 |
---|---|---|
Bending Capacity (Mild Steel) | 14GA | 16GA |
Bending Capacity (Stainless) | 16GA | 20GA |
Bending Length | 126″ (10FT) | 150″ (12FT) |
Bending Bars | 1″ and 7/16 | 1″ and 7/16 |
Back gauge Depth (Standard) | 41″ | 41″ |
Back gauge Depth (Optional) | 61″ | 61″ |
Clamping Beam Opening Height | 7″ | 7″ |
Clamping Beam Tooling | 30 Degrees | 30 Degrees |
Folding Beam Adjustment | 1″ | 1″ |
Crowning of the Folding Beam | 3-Point 0”-0.030” Adjustment | 3-Point 0”-0.030” Adjustment |
Working Height | 34″ | 34″ |
Machine Length | 180″ | 204″ |
Machine Width | 96″ | 96″ |
Machine Height | 72″ | 72″ |
Machine Weight | 9,020 lbs | 10,200 lbs |
Shipping Weight | 9,885 lbs | 10,785 lbs |
Back Gauge Motor | ¾ HP | ¾ HP |
Clamping Beam Motor | 2 HP | 3 HP |
Bending Beam Motor | 2 + 2 HP | 3 + 3 HP |
Clamping Beam Speed | 2.5” per second | 2.5” per second |
Folding Beam Speed | 90 deg per second | 75 deg per second |
Back gauge Speed (0.375” to 41”) | 5 seconds | 5 seconds |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.