New

Tennsmith Manual Floor Model Heavy Duty Down Flange-TDF/TDC Finger Brakes

Tennsmith 4FT and 6FT Manual Floor Model Heavy Duty Down Flange-TDF/TDC Finger Brakes (Box and Pan) with 12GA and 16GA mild steel capacities.

Manual Floor Model Heavy Duty Down Flange-TDF/TDC Finger Brakes	HBT48-12	HBT72-16
Capacity, mild steel	12GA	16GA
Capacity, with bending support angle removed, mild steel	16GA	20GA
Bending length	48 in (4FT)	72 in (6FT)
Maximum lift of beam	1-1/2 in	1-1/2 in
Front to rear beam adjustment	1/2 in	1/2 in
Maximum depth of box	4 in	4 in
Minimum reverse bend	5/8 in	5/8 in
Minimum flange in capacity material	1 in	1 in
Top segment tooling widths	2, 3 and 4 in.	2, 3 and 4 in.
Lower segment tooling widths	1, 1-1/2, 4, 6, 8, 12, 20 in.	1, 1-1/2, 4, 6, 8, 12, 20 in.
Bending beam tooling segments	1, 1-1/2, 6, 8, 12, 20 in.	1, 1-1/2, 4, 6, 8, 12, 20 in.
Maximum transverse bend (through tooling centers)	2 in	2 in
Maximum transverse bend (at either end of machine)	3 in	3 in
Dimensions, counterweights in place, LxWxH	72 x 36 x 53 in.	89 1/2 x 36 x 53 in.
Shipping weight	1750 lbs	2200 lbs

Reviews