Tennsmith 4FT, 6FT, 8FT, 10FT and 12FT Manual Floor Model Heavy Duty Straight Brakes with 12GA, 14GA, 16GA and 18GA Mild Steel Capacities.
Models: HB48-12, HB73-16, HB97-18, HB97-16, HB97-12, HB121-18, HB121-16, HB121-14 and HB145-18
Select the Bending Capacity to Request a Quote!
Tennsmith Manual Floor Model Heavy Duty Straight Brakes Features:
Tennsmith’s heavy-duty hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability.
With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required for upper beam adjustment without the use of wrenches.
Equipped with thrust bearings, the upper leaf adjustment screws permit quick, accurate alignment for different material thicknesses or radii.
Other adjustment features include:
Removable apron angle and insert permit 1/4-inch reverse bends in the lighter material.
Bored in line to ensure perfect alignment, the pivot points are fitted with oil impregnated bearings. The hinge pins are high-tensile, alloy steel.
Ductile steel clamp handles, heavy yokes, grease fittings and an apron stop rod complement the many other fine features of these heavy-duty brakes.
|Tennsmith Manual Floor Model Heavy Duty Straight Brakes||HB48-12||HB73-16||HB97-18||HB97-16||HB97-12|
|Capacity, mild steel||12GA||16GA||18GA||16GA||12GA|
|Bending length||49 in (4FT)||73 in (6FT)||97 in (8FT)||97 in (8FT)||97 in (8FT)|
|Maximum lift of beam||1-7/8 in||1-7/8 in||1-7/8 in||1-7/8 in||2-1/4 in|
|Front to rear beam adjustment||1/2 in||1/2 in||1/2 in||1/2 in||1/2 in|
|Minimum reverse bend||1/4 in||1/4 in||1/4 in||1/4 in||1/4 in|
|Minimum flange in capacity material||1 in||1 in||1 in||1 in||1 in|
|Dimensions, counterweights in place, LxWxH||72 x 36 x 53 in.||114 x 48 x 59-1/2 in.||138 x 48 x 59-1/2 in.||140 x 52 x 60 in.||145 x 54 x 63-1/2 in.|
|Shipping weight||1100 lbs||1200 lbs||1385 lbs||1675 lbs||2800 lbs|
|Tennsmith Manual Floor Model Heavy Duty Straight Brakes||HB121-18||HB121-16||HB121-14||HB145-18|
|Capacity, mild steel||18GA||16GA||14GA||18GA|
|Bending length||121 in (10FT)||121 in (10FT)||121 in (10FT)||145 in (12FT)|
|Maximum lift of beam||1-7/8 in||2-1/4 in||2-1/4 in||2-1/4 in|
|Front to rear beam adjustment||1/2 in||1/2 in||1/2 in||1/2 in|
|Minimum reverse bend||1/4 in||1/4 in||1/4 in||1/4 in|
|Minimum flange in capacity material||1 in||1 in||1 in||1 in|
|Dimensions, counterweights in place, LxWxH||159 x 52 x 60 in.||161 x 53 x 59-1/2 in.||162 x 54 x 63-1/2 in.||185 x 53 x 59-1/2 in.|
|Shipping weight||2300 lbs||2875 lbs||3250 lbs||3400 lbs|
Sheet Metal Break | Sheet Metal Breaks
3 Year Warranty
Only logged in customers who have purchased this product may leave a review.