Marvel Vertical Tilt-Frame Bandsaw
Marvel Vertical Tilt-Frame Bandsaw with 18" x 22" Capacity at 90°, the worlds most popular tilt-frame band saw that has miter cutting up to 45° left and right. All-mechanical, universal, metal cutting, band saw machine.
Speed Range: 50 – 450 fpm (15 – 137 m/min) infinitely variable with inverter drive.
Front Mounted Speed Control: Allows blade speed to be adjusted from operator’s control station.
Feed Pressure: Infinitely variable with control on operator’s panel and Automatic Column Return. Column feed is mechanical with Marvel clutch power feed.
T-Slotted Work Table: Work area 24.25” x 33” (616 mm x 838 mm); Table height 34.5” (876 mm)
Wheel Diameter: 19” (482 mm), cast iron wheels.
Blade Break/Stall Detection: Standard equipment, shuts off machine in the event of blade breaking or stalling.
Quick-Action Vise: Jaws can be shifted to either right or left side of blade. Jaws are 6” (152 mm) high, 12” (305 mm) wide.
Automatic Stops: Adjustable stops can be pre-set to stop advance and return of blade, and also to stop motor at any location within the 18” (457 mm) travel of the blade.
Flushing Hose: Washes chips from hard to get at places reducing clean-up time.
Power Chip Brush: Together with blade wipers and flood coolant deep blade teeth free of chips.
CAPACITY: 90°: 18″ x 22″
CAPACITY: 45°: 18″ x 12.75″
SPEED RANGE: 50-450 fpm infinitely variable speed drive system.
FRONT-MOUNTED SPEED CONTROL: Allows blade speed to be adjusted from operator’s control station.
FEED RANGE: 0 – 140 lbs. infinitely variable direct reading scale balance beam.
T-SLOTTED WORK TABLE: Work area 24.25″ x 33″; table height 34.5″; four machined T-slots accept .625″
(15.5 mm) T-Bolts.
MITER CUTTING: Column and blade tilt up to 45° right and left of vertical; work always stationary. Built in protractor.
QUICK-ACTION VISE: Maximum opening 18″. Jaws can be shifted to either right or left side of blade.
Jaws are 6″ high, 12″ wide.
AUTOMATIC STOPS: Adjustable stops can be pre-set to stop advance and return of blade and to stop motor at any location within the 18″ travel of the blade.
COOLANT SYSTEM: Built in with Flood system, available with added optional drop lubrication system. Controlled by on-off selector switch at operator’s station. Tank capacity 21 gallons.
FLUSHING HOSE: Washes chips from hard-to-get-at places reducing clean-up time.
POWER CHIP BRUSH: Together with blade wipers and flood coolant keep blade teeth free of chips.
CARBIDE GUIDE SYSTEM: Guides are stationary and can be rotated to present new guiding surface to the blade. Upper and lower guides have preloaded carbide-faced back-up blocks to support back edge of the blade.
BLADE: 14′ 6″ Long x 1″ Wide x .035″ Thick. One Welded-Edge Band Blade is furnished with each machine.
MOTORS: Main; 5 H.P., 1800 RPM, totally enclosed fan cooled. Coolant Pump; 1/8 H.P. enclosed motor-built-in integrally.
Two (2) years on replacement parts
One (1) year labor
Only logged in customers who have purchased this product may leave a review.