Request a quote
Receive Monthly Email Specials
Contact us
If it bends it, cuts it, punches it, joins it or rolls it, we sell it!

Pre-Owned (Used) Equipment

Pre-Owned (Used) Sheet Metal and Metal Fabrication Equipment sold in Canada and US includes Empire’s 30 Day Used Equipment Warranty. If your Used Empire machine is not working properly, contact Empire within 30 days of receipt. Empire Machinery will arrange for any required repairs or you can return it, freight prepaid, for a full refund.

  • Used Brown Boggs 30" Barfolder

    Used Brown Boggs 30″ Barfolder

    Used Brown Boggs 30″ Barfolder

    • Capacity: 20GA Mild Steel
    • Mounted on Sturdy Stand
    • Good Condition

    Stock# 7738


    30-Day Used Equipment Warranty

  • Used Brown Boggs 36″ Barfolder

    Used Brown Boggs 36″ Barfolder

    Used Brown Boggs 36″ Barfolder

    • Capacity: 20GA Mild Steel
    • Good Condition

    Stock# 7794C


    30-Day Used Equipment Warranty

  • Roper Whitney 8FT 16GA Straight Hand BrakeRoper Whitney 8FT 16GA Straight Hand Brake

    Used Roper Whitney 8FT 16GA Straight Hand Brake

    Used Roper Whitney 8FT 16GA Straight Hand Brake

    • Model: 816
    • Serial #: 3360-8-99
    • Capacity: 8FT 16GA
    • Floor Model
    • Good Condition

    Made in the USA

    Stock# 7767C


    30-Day Used Equipment Warranty

  • Tennsmith 10FT 16GA Straight Hand BrakeTennsmith 10FT 16GA Straight Hand Brake

    Used Tennsmith 10FT 16GA Straight Hand Brake

    Used Tennsmith 10FT 16GA Straight Hand Brake

    • Model: HB121-16
    • Serial#: 11811
    • Capacity: 10FT 16GA
    • Good Condition

    Made in the USA

    Stock# 7754C


    30-Day Used Equipment Warranty

  • Used Brown Boggs 10FT 18GA Straight Hand Brake

    Used Brown Boggs 10FT 18GA Straight Hand Brake

    Used Brown Boggs 10FT 18GA Straight Hand Brake

    • Model: 1810
    • Serial#: 78163
    • Capacity: 18GA Mild Steel
    • Bending Length: 120″
    • Includes 2 Counterweights
    • Good Condition

    Stock# 7841


    30-Day Used Equipment Warranty

  • Tennsmith 12” Manual Cheek Bender

    Used Tennsmith 12” Manual Cheek Bender

    Used Tennsmith 12” Manual Cheek Bender

    • Model: 12CB
    • Capacity: 12” 22GA Mild Steel
    • Includes Stand to mount on Table
    • Good Condition

    Stock# 7766C


    30-Day Used Equipment Warranty

  • Iowa Precision 5FT 16GA Duct O Matic Starter Coil Line

    Used Iowa Precision 5FT 16GA Duct O Matic Starter Coil Line

    Used Iowa Precision 5FT 16GA Duct O Matic Starter Coil Line

    • Model: Duct O Matic
    • Capacity: 5FT 16GA
    • 4-uncoilers
    • Level, Bead, Notch for Slip/Drive, TDC/F and Cut to Length
    • Year 1990
    • Updated Siemens Control/Keypad 7 years ago
    • Electrics: 575V 3PH 60Hz
    • Good Condition

    FOB Surrey, BC

    Stock# 7700


    30-Day Used Equipment Warranty

  • Sullivan 5 HP 120 Gallon Vertical Tank CompressorSullivan 5 HP 120 Gallon Vertical Tank Compressor

    Used Sullivan 5 HP 120 Gallon Vertical Tank Compressor

    Used Sullivan 5 HP 120 Gallon Vertical Tank Compressor

    • Model: SPVT 735120
    • Serial#: 5-14-G11
    • Magnetic Starter
    • 5HP 120 Gallon Vertical Tank
    • Electrics: 220V 3PH 60Hz
    • Excellent Condition

    Stock# 7755C


    30-Day Used Equipment Warranty

  • Used Ibarmia Model B-50 Column-Type Drill Press

    Used Ibarmia Model B-50 Column-Type Drill Press

    Used Ibarmia Model B-50 Column-Type Drill Press

    • Maximum drilling capacity in steel: 2 in
    • Maximum drilling capacity in cast iron: 2.36 in
    • Maximum tapping capacity in steel: M 1.4 in
    • Maximum tapping capacity in cast iron: M 1.65 in
    • Morse taper MT: 4
    • Maximum spindle stroke (drilling depth): 9 in
    • Main motor power: 5 HP
    • Coolant pump motor power
    • Transmission: Gear box
    • Speed range 66 – 1255 RPM
    • Feed: Automatic by electromagnetic clutch
    • Number of automatic feeds: 6
    • Automatic feed range: 0.1-0.2-0.3-0.4-0.5-0.6
    • Worktable dimensions (LxW): 22″ x 22″
    • Column diameter: 8 in
    • Distance from spindle centre to column face: 16 in
    • Equipped with: Hardened and ground high-quality steel gears
    • Speed plate and selecting levers on head front
    • Gearbox lubrication by automatic pump
    • Machined base with coolant tank and pump
    • Worklight
    • MGI Rotating table plate
    • Automatic feed and cut-off by electromagnetic clutch
    • Depth scale and adjustable depth stop
    • Automatic tool ejector
    • Built-in low voltage electrical equipment in machine head
    • Emergency STOP
    • Spindle turn selection switch
    • Drill guard with microswitch
    • Good Working Condition
    • Stock# 7831

      30-Day Used Equipment Warranty

  • Sumner 650 lbs LiftSumner 650 lbs Lift

    Used Sumner 650 lbs Lift

    Used Sumner 650 lbs Lift

    • Model: 2124
    • Load Capacity: 650 lbs
    • Good Condition

    Stock# 7764C


    30-Day Used Equipment Warranty

  • Assorted Tool Holders & Storage Cabinet

    Used Assorted Tool Holders & Storage Cabinet

    Used Assorted Tool Holders & Storage Cabinet

    • Includes 20 assorted CAT50 tool holders
    • Cabinet dimensions: 63”x30”x60”
    • Great Condition
    Holder Part number QTY
    Narex Cat50 WE3/4 2
    GS CAT50 1″ – 6.00″ 2
    Sandvik A392.4514-50 40 101 3
    Iscar – ETM CAT50 – ITS-BORE 1
    Sandvik A392.4520-50 25 101 3
    GS CAT50 ER40-6.00″ 1
    Kennametal CV50EM150400 1
    Ingersoll C50-15&M240 1
    Kennametal CV50EM125400 2
    Sandvik A392.4505 38 101 1
    Sandvik A392.4560B-50 02 089 2
    Sandvik A391.05-63 050 1

    Stock# 6256C


    30-Day Used Equipment Warranty

    Size: 63”x30”x60”; 20 CAT50 tool holders
  • Engel 10FT air operated slip and drive notcher

    Used Engel 10FT 18GA Air Operated Slip & Drive Notcher

    Used Engel 10FT 18GA Air Operated Slip & Drive Notcher

    • Model: 1010LM-AP
    • Max. Capacity: 18GA Mild Steel
    • Heads: (1) RH Corner, (1) LH Corner, (3) “V” Notch and TDF
    • Working height: 31”
    • Notching Depth Range: 0 to 11/4” or 0 to 11/2″
    • Air Requirements: 2 CFM at 100 PSI
    • Approx. Shipping Weight: 1,300 lbs
    • Cleaned and Painted

    Used TDF Notching heads INCLUDED!

    Stock# 6390


    30-Day Used Equipment Warranty

  • Used Lockformer 10FT 16GA Hydraulic Slip & Drive NotcherUsed Lockformer 10FT 16GA Hydraulic Slip & Drive Notcher

    Used Lockformer 10FT 16GA Hydraulic Slip & Drive Notcher

    Used Lockformer 10FT 16GA Hydraulic Slip & Drive Notcher

    • Capacity: 10FT 16GA
    • Residential notcher with 5 heads
    • 5 Heads (2 Corners, 3 “V”)
    • Electrics: 208V 3PH 60Hz
    • Good Condition

    Stock# 6943


    30-Day Used Equipment Warranty

  • Used Duro Dyne Hand Held Compact Pinspotter Model MFPT

    Used Duro Dyne Hand Held Compact Pinspotter Model MFPT

    Used Duro Dyne Hand Held Compact Pinspotter Model MFPT

    • Model: MFPT
    • Serial#: 7559
    • Welds pins from ½ inch to 2 inches long on steel from 26 to 20GA
    • Electrics: 220V 1PH 60Hz
    • Good Condition

    Stock# 7790C


    30-Day Used Equipment Warranty

    Welds Pins from 1/2" to 2" up to 20GA
  • Used Duro Dyne 5FT Throat Bulk Feed Type Fixed Head Automatic PinspotterUsed Duro Dyne 5FT Throat Bulk Feed Type Fixed Head Automatic Pinspotter

    Used Duro Dyne 4FT Throat Bulk Feed Type Fixed Head Automatic Pinspotter

    Used Duro Dyne 4FT Throat Bulk Feed Type Fixed Head Automatic Pinspotter

    • Model: FG-1
    • 4FT Throat
    • For use with 1/2″ – 1-1/2″ Weld Pins
    • Welds SSP, CP & FTC type fasteners to ductwork up to 16GA
    • Electrics: 220V 1PH 60Hz
    • Good Working Order

    Stock# 7126


    30-Day Used Equipment Warranty

    Welds Pins from 1/2" to 1-1/2" up to 16GA