Miscellaneous Equipment

  • Van Mark Coil Dispenser

    Van Mark Coil Dispenser

    Take control of all your coil handling situations with the original coil stock tool, Coil Cradle™. Pioneered by Van Mark Products, Coil Cradle™ gives you one-hand payout without snags and without damage. In the shop, use Coil Cradle™ with your basic color coils and see the reduction in scrap over a period of time. Any tool that pays for itself is a tool that will pay you. Don’t be fooled by copies of the original, make yours a Coil Cradle™

    • Built-in 90 degree scoring edge with stainless steel strip
    • Full width measuring scale
    • Scratch resistant polyethylene-covered rollers & cutting bed
    • Material releases from cradle smoothly
    • Portable and easy to setup
    • Fully enclosed feed tray
    • Strongest & most durable coiler on the market

    Take control of all your coil handling situations with the original coil stock tool, Coil Cradle™. Pioneered by Van Mark Products, Coil Cradle™ gives you one-hand payout without snags and without damage. In the shop, use Coil Cradle™ with your basic color coils and see the reduction in scrap over a period of time. Any tool that pays for itself is a tool that will pay you. Don’t be fooled by copies of the original, make yours a Coil Cradle™

    • Built-in 90 degree scoring edge with stainless steel strip
    • Full width measuring scale
    • Scratch resistant polyethylene-covered rollers & cutting bed
    • Material releases from cradle smoothly
    • Portable and easy to setup
    • Fully enclosed feed tray
    • Strongest & most durable coiler on the market
  • Van Mark Quickscore

    Van Mark QuickScore

    QuickScore™ scores along the outer edge of the brake allowing a downward separation and as you lift the piece up, it snaps, right into your hands where you need it. Tool uses standard utility blades.

    QuickScore™ scores along the outer edge of the brake allowing a downward separation and as you lift the piece up, it snaps, right into your hands where you need it. Tool uses standard utility blades.

  • Van Mark trim a slitter

    Van Mark Trim-A-Slitter

    Trim-A-Slitter™ from Van Mark is built tough and will provide years of dependable, trouble-free service. Engineered to slit, perforate and stiffen most coil and sheet materials, the Trim-A-Slitter™ is a must for anyone performing light-to-heavy duty material handling. Trim-A-Slitter™ is a rugged piece of precision equipment designed for demanding on-the-job use. The unit is fully anodized to retain its integrity, good looks and function for years, no matter what the weather.

    • Available in 14″, 24″ models. For wider models up to 72″, see our Industrial Slitters. Rest assured we have the right slitter for your needs.
    • The Trim-A-Slitter™ from Van Mark is truly a tool engineered to save you time and money both on the job and in the shop.
    • Contact Van Mark today to find out how the Trim-A-Slitter™ can increase both your productivity and profit.

    Trim-A-Slitter™ from Van Mark is built tough and will provide years of dependable, trouble-free service. Engineered to slit, perforate and stiffen most coil and sheet materials, the Trim-A-Slitter™ is a must for anyone performing light-to-heavy duty material handling. Trim-A-Slitter™ is a rugged piece of precision equipment designed for demanding on-the-job use. The unit is fully anodized to retain its integrity, good looks and function for years, no matter what the weather.

    • Available in 14″, 24″ models. For wider models up to 72″, see our Industrial Slitters. Rest assured we have the right slitter for your needs.
    • The Trim-A-Slitter™ from Van Mark is truly a tool engineered to save you time and money both on the job and in the shop.
    • Contact Van Mark today to find out how the Trim-A-Slitter™ can increase both your productivity and profit.
  • Van Mark TrimCutter

    Van Mark TrimCutter

    Designed to make your job site life a little easier while saving you time and money, you can count on TrimCutter™ to handle your material cutting needs. As with all our products, we are confident this tool will become an integral part of your job routine. By the time you add up the savings in time and labor, you’ll realize what thousands of contractors already know, TrimCutter™ pays for itself in no time at all.

    • Knives made from 100% hardened tool steel.
    • Tool uses 4-point roll bearing track system.
    • Use with Mark I , II, IV and Metal Master 20™ Series Brakes.
    • Dust Collection Systems

    Designed to make your job site life a little easier while saving you time and money, you can count on TrimCutter™ to handle your material cutting needs. As with all our products, we are confident this tool will become an integral part of your job routine. By the time you add up the savings in time and labor, you’ll realize what thousands of contractors already know, TrimCutter™ pays for itself in no time at all.

    • Knives made from 100% hardened tool steel.
    • Tool uses 4-point roll bearing track system.
    • Use with Mark I , II, IV and Metal Master 20™ Series Brakes.
    • Dust Collection Systems
  • Van Mark Trimformer

    Van Mark TrimFormer

    The TrimFormer gives you the ability to strengthen and beautify ordinary trim work into designs that distinguish your workmanship from all others

    • Effortlessly integrate custom profiles into your trim work.
    • Only TrimFormer™ offers “true” brick mold profiles.
    • Affordable unit pays for itself in as little as one job.
    • TrimFormer™ comes standard with brick-mold & rib dies.
    • Optional Crown Molding dies available

    The TrimFormer gives you the ability to strengthen and beautify ordinary trim work into designs that distinguish your workmanship from all others

    • Effortlessly integrate custom profiles into your trim work.
    • Only TrimFormer™ offers “true” brick mold profiles.
    • Affordable unit pays for itself in as little as one job.
    • TrimFormer™ comes standard with brick-mold & rib dies.
    • Optional Crown Molding dies available
  • unistand

    Van Mark UniStand

    Fits all Van Mark brakes with 14” throat depth and TAT50/TAT60 saw tables while the USA2 fits any Van Mark brake, but was specifically designed for models with a 20” throat depth. Both models feature a 4 point adjustable leg system designed to give you control over the tool height.

    Fits all Van Mark brakes with 14” throat depth and TAT50/TAT60 saw tables while the USA2 fits any Van Mark brake, but was specifically designed for models with a 20” throat depth. Both models feature a 4 point adjustable leg system designed to give you control over the tool height.

  • Van Mark Trim-A-Gutter

    Van Mark Trim-A-Gutter

    Custom Form Profitable Gutter Hood for Virtually any 5″ or 6″ K Style Gutter

    1) Easy to do
    a. All you need is our Trim-A-Gutter tool and Brackets (now in both 5” and 6”)
    b. It’s simple to operate our tool and easy to install the hood
    c. No specialized training needed

    2) Inexpensive
    a. The cost per foot of this system is one of the lowest available
    b. No franchise or marketing fees

    3) Flexible
    a. Choose from hundreds of coil colors vs. only a few with other systems
    b. Choose the metal that best suits the job
    c. Make any style hood the customer prefers that fits their job. Choose fascia or roof mount,
    dome or low profile…it’s up to you

    4) Profitable
    a. Competes with high end hood systems at a premium price, but without the costs
    b. Avoid waste by using only the size of hood needed rather than the “one size fits all” approach of other systems
    c. Expand endlessly. No limited territories

    5) Support
    a. Sales and Technical support available (8a-4p EST M-F)
    b. Video training & marketing tools available on the web and DVD

    Custom Form Profitable Gutter Hood for Virtually any 5″ or 6″ K Style Gutter

    1) Easy to do
    a. All you need is our Trim-A-Gutter tool and Brackets (now in both 5” and 6”)
    b. It’s simple to operate our tool and easy to install the hood
    c. No specialized training needed

    2) Inexpensive
    a. The cost per foot of this system is one of the lowest available
    b. No franchise or marketing fees

    3) Flexible
    a. Choose from hundreds of coil colors vs. only a few with other systems
    b. Choose the metal that best suits the job
    c. Make any style hood the customer prefers that fits their job. Choose fascia or roof mount,
    dome or low profile…it’s up to you

    4) Profitable
    a. Competes with high end hood systems at a premium price, but without the costs
    b. Avoid waste by using only the size of hood needed rather than the “one size fits all” approach of other systems
    c. Expand endlessly. No limited territories

    5) Support
    a. Sales and Technical support available (8a-4p EST M-F)
    b. Video training & marketing tools available on the web and DVD

  • Van Mark NailHawg

    Van Mark NailHawg

    Keep your jobsite from digging it’s nails into your cleanup routine with the most innovative magnetic sweeper to come along in years. NailHawg™ uses a state-of-the-art magnet assembly in a durable weather resistant body to ensure this tool stays working on the job for many years to come. Bending and stooping over to clear debris from a magnetic sweeper is a thing of the past. NailHawg™ uses a unique hand/toe release which allows complete control over collection of all the nails into one location for easy disposal.

    Keep your jobsite from digging it’s nails into your cleanup routine with the most innovative magnetic sweeper to come along in years. NailHawg™ uses a state-of-the-art magnet assembly in a durable weather resistant body to ensure this tool stays working on the job for many years to come. Bending and stooping over to clear debris from a magnetic sweeper is a thing of the past. NailHawg™ uses a unique hand/toe release which allows complete control over collection of all the nails into one location for easy disposal.

  • elbow machineelbow machine

    IPI Elbow Machine

    IPI Elbow Joint making machine with capacity from 30GA to 25GA and tube diameter ranging from 3″ to 16″.

    Please select the diameter range to Request a Quote!

    IPI Elbow Joint making machine with capacity from 30GA to 25GA and tube diameter ranging from 3″ to 16″.

    Please select the diameter range to Request a Quote!

    30GA to 25GA - 3" to 16" Tube Diameter
  • Used Chevalier Model FSG-1020AD Precision Surface Grinder

    Used Chevalier Precision Surface Grinder

    Used Chevalier Model FSG-1020AD Precision Surface Grinder

    • Model: FSG-1020AD
    • Serial #: 25124
    • Includes: Programmable Automatic Control
    • Electrics: 208V 3PH 60Hz
    • Good Working Condition

    Stock# 7813C


    30-Day Used Equipment Warranty

    Used Chevalier Model FSG-1020AD Precision Surface Grinder

    • Model: FSG-1020AD
    • Serial #: 25124
    • Includes: Programmable Automatic Control
    • Electrics: 208V 3PH 60Hz
    • Good Working Condition

    Stock# 7813C


    30-Day Used Equipment Warranty